DM6 – 6 Channel Demultiplexer

6 Channel demultiplexer 1 – 10 V

INSTRUCTION MANUAL

The demultiplexer DM6 operates autonomously or connected to console DMX 512. It includes 6 regulation channels 1-10 V.
The display indicates the channel lighting percentage.
Terminal strips and XLR 3-pinned plug are used to connect the demultiplexer with the electrical load.
Data is regulated by up / down buttons and the data LED turns on.

To activate the manual check mode hold pressed the buttons (+ ) and ( -) simultaneously for 3 sec. Then the display indicates <1.0.0> . You can choose the preferred channel with the buttons (+ / -) and the preferred lighting percentage with the UP/DOW buttons. At the <7.0.0> address you can control all the channels together (master mode).
To exit the manual check mode pressed the buttons (+ / -) simultaneously.

The demultiplexer can operate with 1 channel, 2 channels, 3 channels or with 6 channels which is the normal state. In order to choose the number of channels you prefer first you must switch of the demultiplexer. Then hold pressed the (-) button and switch on the ON/OFF switch. Pressing UP / DOWN buttons you can select between 1, 2, 3, 6 channels. To finish the selection press (+) button.
Note: After power outage the converter returns to its last state. If error appears on the display there is a connection problem between the converter and the console.